Packages
| Software |
Telephones |
Hardware
| Service | Used Equipment
| Telecor
DCU-100 Model: PV-DCU-100 |
||
| The Telecor DCU-100 Dry Contact Unit provides two relay contact closures, two paging outputs and two music inputs. For more info click here. |
MSRP $259 |
|
|
|
||
| Telecor
PEU-250 Model: PV-PEU-250 |
||
| The Telecor Port Expansion Unit Model PEU250 has 16 universal ports that can easily be configured as a trunk or station line with a simple click of a button. LED's display status for the host adapter ports. For more info click here. |
MSRP $4599 |
|
|
|
||
| Telecor
PEU-205 Model: PV-PEU-205 |
||
| The PEU205 serves as the first Port Expansion Unit in a Telecor VS1 business telephone system. It features two zone page outputs for overhead paging systems, two music inputs for music-on-hold and two dry contact relays. For more info click here. |
MSRP $3399 |
|
|
|
||
| Telecor
PEU-200 Model: PV-PEU-200 |
||
| The PEU-200 is used for system expansion beyond 16 ports. The first eight ports can be configured as either Central Office ports or stations. The remaining eight ports can be configured as stations only. For more info click here. |
MSRP $3199 |
|
|
|
||
| Telecor
Caller ID Option Module Model: PV-HWC-C10 |
||
| The 8-port Caller ID option module is installed inside a Telecor PEU200 or PEU205. It allows you to easily identify callers by name and number before answering the phone. |
MSRP $1199 |
|
|
|
||
| Telecor
4 Port Cut-over Box Model: PV-HWC-P10 |
||
| The Cut-over Box provides power failure protection for four CO lines by routing them directly to station sets. If you have a power failure or if the system is turned off, each station connected to the Cut-over Box becomes a direct outside line for incoming and outgoing calls. |
MSRP $449 |
|
|
|
||
| Telecor
32 Port Host Adapter Model: PV-HA2-032 |
||
| Host Adapter Cards are installed in the Telecor Voice Server and are used to connect additional Telecor Port Expansion Units to the Telecor Voice Server. The 32 Port card supports two PEU's. |
MSRP $599 |
|
|
|
||
| Telecor
64 Port Host Adapter Model: PV-HA2-064 |
||
| Host Adapter Cards are installed in the Telecor Voice Server and are used to connect additional Telecor Port Expansion Units to the Telecor Voice Server. The 64 Port card supports four PEU's. |
MSRP $929 |
|
|
|
||
| Telecor
T-1 Interface Card Model: PV-HWC-T10 |
||
| The
T1 Interface Card has a built-in channel service unit and supports 24
channels for T1 and fractional T1 services. This T-1 card supports E&M, Direct Inward Dialing, Dialed Number Identification Services, Automatic Number Identification, Ground Start, Loop Start, and diagnostics. |
MSRP $2999 |
|
|
|
||
|
ISDN-PRI to T-1 Converter |
||
| This ISDN-PRI to T-1 converter enables you to connect a PRI directly to a Telecor T-1 Interface card. You can also set the caller ID sent to the network in addition to many other applications. Call for more info. |
MSRP $3999 |
|
|
|
||
| Telecor
10BaseT Network Interface Card Model: PV-HWC-E10 |
||
| The Telecor 10Base-T Network Interface Card can be installed in the voice server if you want to write SMDR data to a Novell network or an NT 4.0 server running File and Print Services for Netware (FPNW). It has a pre-configured I/O address of 340 IRQ 11. |
MSRP $259 |
|
|
|
||
| Telecor
56K Internal Modem Model: PV-MDM-200 |
||
| This 56K Internal modem comes with a pre-configured I/O address and IRQ settings for plug-and-play operation. This modem is a must for remote site administration. |
MSRP $199 |
|
|
|
||
| 2
Port Analog DID Card Model: VP-2000 |
||
| The VP-2000 converts two standard CO line ports to analog DID ports enabling Direct Inward Dialing features without a T-1 card. This card can be installed in a spare ISA slot in the VS-1 server or in a separate chassis. |
MSRP $795 |
|
|
|
||
| Telecor
ACD Status Board Option Kit Model: PV-HWC-A10 |
||
| The Automatic Call Distribution status board option kit provides an interface between the voice server and an ACD status board (which can be purchased separately). It allows supervisors to monitor the progress of calls in the ACD groups. The kit includes the ACD status phone and ACD status board connection cable. |
MSRP $599 |
|
|
|
||
|
ACD LED Status Board Model: DAS-1512R1 |
||
| This single line LED status board is designed for use with the ACD status board option kit (PV-HWC-A10) and is 28.9" wide, 4.5" high and 2.1" deep. It can display up to 22 characters 2" tall using red LED's. |
MSRP $599 |
|
|
|
||
| Telecor
CTIM Model: PV-HCT-C01 |
||
| The CTIM Module is an external interface for connecting your computer to the VS1™ Business Telephone System via an industry-standard serial port with connections for a headset or handset and volume controls. |
MSRP $299 |
|
|
|
||
| Telecor
PCOM Model: PV-HCT-M01 |
||
| The PCOM Module is an external interface for connecting your computer to the VS1™ voice server via an industry-standard serial port. It allows Connect users to use the computer screen for call processing while using a standard phone on the desk. |
MSRP $199 |
|
|
|
||
| 7
Foot Aluminum Equipment Rack Model: ICC-MSA-1984 |
||
| These 7 foot tall aluminum equipment racks have a natural brushed finish and pre-drilled and tapped mounting holes for standard 19" equipment. |
MSRP $299 |
|
|
|
||
| 4
Foot Aluminum Equipment Rack Model: ICC-MSA-1948 |
||
| These 4 foot tall aluminum equipment racks have a natural brushed finish and pre-drilled and tapped mounting holes for standard 19" equipment. |
MSRP $199 |
|
|
|
||
| 20"
Double-sided Aluminum Shelf Model: ICC-MSR-DS20 |
||
| This double-sided aluminum equipment shelf is 20" deep and can support up to 125lbs. This shelf is ideal for the Telecor VS-1 server. |
MSRP $99 |
|
|
|
||
| 24
Port 6 Conductor Patch Panel Model: ICMPP024U6 |
||
| This 24 port voice patch panel has USOC 6 conductor jacks and 10-style punch downs on the back. This patch panel will support all Telecor station options as well as CO lines. Click here for datasheet. |
MSRP $100 |
|
|
|
||
| 48
Port 6 Conductor Patch Panel Model: ICMPP048U6 |
||
| This 48 port voice patch panel has USOC 6 conductor jacks and 10-style punch downs on the back. This patch panel will support all Telecor station options as well as CO lines. Click here for datasheet. |
MSRP $190 |
|
|
|
||
| 96
Port 6 Conductor Patch Panel Model: ICMPP096U6 |
||
| This 96 port voice patch panel has USOC 6 conductor jacks and 10-style punch downs on the back. This patch panel will support all Telecor station options as well as CO lines. Click here for datasheet. |
MSRP $400 |
|
|
|
||
| 680VA
UPS Model: MBK680 |
||
| The MBK 680 is a 680VA/442W 120 VAC stand-by UPS with 3
surge/backup receptacles, 1 surge-only receptacle, and 1 modem/fax
surge protection outlet. Click here for
datasheet. |
|
|
|
|
||
| 700VA
Rack-mount UPS Model: MCP700RME |
||
| The MCP 700 RME is a rack mount 700VA/500W 120 VAC true on-line, double-conversion, extended runtime UPS designed for critical, power-sensitive electronic environments such as the Telecor voice server. Click here for datasheet. |
|
|
|
|
||
| 3000VA
Rack-mount UPS Model: MCP3000RME |
||
| The MCP 3000 E is a rack mount 3000VA/2100W 120 VAC true on-line, double-conversion, extended runtime UPS designed for critical, power-sensitive electronic environments such as the Telecor voice server. Click here for datasheet. |
|
|
|
|
||
Packages
| Software |
Telephones |
Hardware
| Service | Used Equipment
Copyright© 2007 Visual Interactive Communications All rights reserved.